10" Big Blue Jumbo Housings

Alpine Pure Clear filter housing for 10 inch Full-Flow Big Blue/Jumbo filter cartridges; Made from Food Grade materials. Heavy Duty 10" Jumbo with 1" (25mm) ports. Max 90 psi. These 10" jumbo housings are used for whole house systems as a single unit or a twin unit when joined together with 1" nipples and a twin SS bracket. Suitable for all 10" X 4 1/2" filter cartridges. Complete as shown with SS bracket, SS Screws, and Spanner. Please note if this clear housing is situated in sunlight it will grow green algae inside it. Please also note this filter housing does not include any filter cartridge.

Twin Whole of House 10" Big Sediment filter system using Alpine Pure Gradient Density filters.

50 LPM flow rate and it is used when sediment is the main reason for fitting filters.

Uses two grades of sediment filters, in the first housing there is a 50 to 20 micron filter and the second housing contains a 20 to 1 micron filter.

Kit includes: Two Polyspun Gradient Density Filters and two Big Blue housings with 25mm BSP Ports, Double Stainless Steel bracket, housing spanner, SS housing screws, housing jointer.

Alpine Pure filter housing for 10 inch Full-Flow Big Blue/Jumbo filter cartridges; Made from Food grade materials. Heavy Duty 10" BIG Blue with 1" (25mm) ports. Max 90 psi. These 10" jumbo housings are used for whole house systems as a single unit or when joined together with 1" nipples and a twin SS bracket. Suitable for all 10" X 4 1/2" filter cartridges. Complete as shown with SS bracket, SS Screws and Spanner. Please note this filter does not include any filter cartridge.

Alpine Pure filter housing for 10 inch Full-Flow Big Blue/Jumbo filter cartridges; Made from Food grade materials. Heavy Duty 10" BIG Blue with 3/4" (20mm) ports. Max 90 psi. These 10" jumbo housings are used for whole house systems as a single unit or when joined together with 3/4" nipples and a twin SS bracket. Suitable for all 10" X 4 1/2" filter cartridges. Complete as shown with a SS bracket, SS Screws, and Spanner. Please note this filter does not include any filter cartridge.

Alpine Pure filter housing with 3/4" or 20mm ports for a Full-Flow standard size filter. Made from Food grade materials. Max 125 psi. These 10" Std size housings are used for a small whole house system as a single unit or when two housings are joined together with 3/4" nipples and a twin bracket. Suitable for all 10" X 2 1/2" filter cartridges. Complete as shown with SS bracket, SS Screws, and Spanner. This filter is the correct size to connect to any exterior tap for filtering water to a garden hose or water tanks while camping, boating ETC. We recommend using the 0.5 micron CR1, PB1 for tank drinking water or the CTO 5 micron for Chlorine removal only. As a sediment filter go to the 10 inch x 2 1/2 inch Gradient Density Polyspun filters for a range of micron sizes. Please note this filter does not include any filter cartridge.

O-ring for 10 inch and 20 inch Big Blue housings.

It is the Largest size O-ring in the picture.

This O-ring is the model that sits in a U shaped groove in the top edge of the filter housing base.

Alpine Pure filter housing. Made from NSF and FDA grade materials. 1/2 inch ports. Max 125psi. Suitable for any inline application like Boat, Camper, or where a filter housing is needed to filter all the cold water supply to a sink or when no seperate water filter tap is wanted. Fits all 10" X 2 1/2" Std size filter cartridges. Package includes a SS Bracket,SS screws and spanner. These clear housings are not suitable for installing in sunlight as Algae will grow inside the housing. Please note this filter does not include any cartridge.

This Whole of House system is an excellent performer and yet very cost effective. Used in both Rural and City Properties. These NSF Approved Alpine Pure System Housings are for those of you that want the good water flow and High dirt/chlorine/heavy metals holding capacity. Manufactured with 1" BSP ports. Package includes 2 X 10" BIG Blue housings, Twin Stainless Steel bracket with SS screws, spanner and a 25mm housing joiner. Suitable for all our 10" X 4 1/4" carbon or sediment filter cartridges.

In a rural situation we recommend the 50-20 micron Gradient Density followed by a 20-1 micron final cartridge if sediment removal is all you need. If Taste or Odor is and issue then the 20-1 micron Gradient Density goes first followed by a Carbon Block 5 or 10 micron depending on your budget.

This set up is a very common sight on Rural properties. Ideal for tank or bore water filtration.This Whole of House system is an excellent performer and yet very cost effective. Used in both Rural and City Properties. These NSF Approved Alpine Pure System Housings are for those of you that want the good water flow and High dirt/chlorine/heavy metals holding capacity. Manufactured with 3/4" BSP ports. Package includes 2 X 10" BIG Blue housings, Twin Stainless Steel bracket with SS screws, spanner and a 20mm housing joiner. Suitable for all our 10" X 4 1/4" carbon or sediment filter cartridges.

In a rural situation we recommend the 50-20 micron Gradient Density followed by a 20-1 micron final cartridge if sediment removal is all you need. If Taste or Odor is and issue then the 20-1 micron Gradient Density goes first followed by a Carbon Block 5 or 10 micron depending on your budget.